Automotive parts vibration testing
Labtone Test Equipment

Automotive parts vibration testing can be used to test parts in a variety of closed-loop, controlled, durable cycle conditions, including sinusoidal alternating, sinusoidal sweep, resonant stagnation and random vibration. Labtone’s vibration test system has a maximum load of 2,000kg with GP system support and a maximum dynamic thrust of 200,000N. It can also be used in combination with an environmental chamber. It not only meets the test specifications of major OEMs and parts suppliers but can also test according to customers’ design specifications in accordance with the relevant standards.

Combined temperature, humidity and vibration testing means adding environmental durability tests to vibration tests; that is, when a vibration test is carried out, the product should be fixed in the temperature and humidity chamber. The temperature and humidity conditions are set according to the requirements, and the vibration test is carried out within specific temperature and humidity parameters. The purpose of the temperature, humidity and vibration test is to find the weak link in the product design. It enables the product manufacturer to ascertain the working conditions and service life of the product in the pre-set use environment, understand the maintenance requirements and ensure the quality of the product in mass production.

Back to News