|
SESSION 1: NVH ANALYSIS
MODERATOR: David MacDonald, chairman, Inov8 Technologies plc
|
09.30 - 09.55
SEA modeling and testing for evaluation of automotive structure-borne and airborne noise
ELASIS – Armando Contursi, NVH test engineer
|
|
| |
|
09.55 - 10.20
Measurement and subjective correlation of diesel engine noise using sound quality metrics
Magna Steyr – Peter Jacobsen, NVH engineer |
|
| |
|
10.20 - 10.45
Advanced concepts on the analysis of in-service vibration of vehicle components
Applus+ IDIADA – Juan J. Garcia, manager, NVH |
|
| |
|
10.45 - 11.10
Using the NVH simulator to predict NVH performance early in the development programme
Bruel & Kjaer – Bernard Ginn, product manager, sound quality systems |
|
| |
|
11.10 - 11.35
Practical measurements of axle noise using torsional vibration
Anthony Best Dynamics Ltd – Andrew Middleton, technical director |
|
| |
|
11.35 - 12.00
Virtual simulation – tool for shortening the 4/7 poster analysis
CSI SpA – Flavio Mercandelli, engineer |
|
| |
|
12.00 - 12.25
3-D scanning vibrometry - an indispensable measurement tool for efficient experimental modal analysis
and FEM correlation
Polytec GmbH - Heinrich Steger, product management |
|
| |
|
| SESSION 2: DURABILITY TESTING |
| |
|
12.50 - 13.15
Automotive EMC 600V/m radiated immunity radar pulse test solutions
AR Worldwide – Jason Smith, senior applications engineer |
|
| |
|
13.15 - 13.40
Mission profiling and test synthesis based on fatigue damage
nCode International – Thomas Kemmerich, application engineer |
|
| |
|
SESSION 3: RIDE AND HANDLING
MODERATOR: Mike Reeves, managing director, MTS Systems Ltd |
| |
|
14.30 - 14.55
Laboratory method for the development and validation of mechatronic chassis systems
MTS Systems – Bill Langer, principal staff engineer
dSPACE GmbH – Peter Waltermann, lead engineer, applications |
|
| |
|
14.55 - 15.20
Better evaluation in R&D with a new and innovative dynamic driving simulator concept
Simtec GmbH – Bernd Kaufmann, managing director |
|
| |
|
15.20 - 15.45
WheelWatch: a new optical high-speed measurement of wheel movement up to 250 km/h during test drives or on test rigs
AICON 3D Systems GmbH – Guenter Suilmann, director sales and marketing |
|
| |
|
15.45 - 16.10
Improvement of steering precision feel in hydraulic power steering system with recirculating ball type steering system in SUV class of vehicle by modulating the input torque in steering gear box and
flow characteristics in the hydraulic pump
Tata Technologies Ltd – Joyanta Kumar Chakrabarty, project manager |
|
| |
|
16.10 - 16.35
New cost-efficient simulation techniques using Autosar
LINEAS Automotive GmbH – Olaf Kindel, system architect |
|
