Free-to-attend Technology Presentation Stage

Day 1 - Wednesday, August 28

10:00

Automated testing of driver monitoring systems (DMS)

Wei Wang
business manager
CATARC (TianJin) Automobile Engineering Research Institute Co. Ltd
CHINA
The presentation covers a biomimetic robot for the smart cockpit that includes a robot head, face, neck, torso, arms and fingers, an artificial mouth, a microphone and more, used to replace manual operation and identification. Through the control of bionic mannequin head movements, facial movements, arm movements, finger movements, etc, it can complete the testing of intelligent cockpit functions such as driver state monitoring, face recognition testing, gesture testing, touch interaction, voice interaction and so on. The design of the bionic dummy test system can greatly improve testing efficiency and provide technical support for the specialized testing of the intelligent cockpit.

What the audience will learn

  • Introduction of automated test system of DMS
  • Function of automated test system of DMS
  • Application of automated test system of DMS
  • Advantage of automated test system of DMS

10:30

800V high-voltage system testing solution

Wenbing Chen
technical manager
Itech Electronic Co. Ltd
CHINA
The technology of new energy vehicles has developed rapidly, and it has gained a leading advantage over traditional fuel vehicles in terms of power performance, intelligence and use cost. However, long-distance travel with insufficient endurance and inconvenient charging are two major pain points of new energy vehicles. To extend the endurance mileage, major manufacturers have adopted technical solutions to increase battery capacity and provide fast-charging solutions to effectively solve the anxiety of charging and endurance. The 800V high-voltage system technology of new energy vehicles has emerged as the times require. In this presentation, Itech engineer Vincent Chen will introduce the testing solution of the 800V high-voltage system for new energy vehicles based on application cases.

What the audience will learn

  • Charging pile testing solution
  • Battery testing solution
  • New energy vehicle three electric system testing solution
  • Automotive electronic testing solutions

11:00

ECU testing/validation one-stop solution

Han Zhang
ECU test manager
Windhill Technologies Co. Ltd
CHINA
In the automotive electronics industry, the ECU is an important unit. ECU testing is necessary to improve the reliability and stability of the controller. This presentation will introduce industry testing solutions and Windhill Technology's ECU testing solutions to help you achieve fast testing and verification.

What the audience will learn

  • Development trends of automotive electronics
  • The vECU technology expectation has become an industry consensus
  • Test management helps save time and testing efficiency
  • What can Windhill’s solution help you to do?
  • Application project achievements

11:30

Advanced intelligent testing platform

Harry Tan
automotive segment business development manager
imc Test & Measurement (an Axiometrix Solutions brand)
CHINA
With the continuous development of automobiles in the fields of intelligence and new energy, test tasks are showing the trend of big data, multiple types and databases. The intelligent test platform imc provides can quickly generate integrated solutions, covering energy flow testing, dynamics testing, noise testing, intelligent driving tests, intelligent cockpit tests, etc.

What the audience will learn

  • Energy flow testing
  • Dynamics testing
  • Noise test
  • Intelligent driving test
  • Intelligent cockpit test

12:00

TBC

12:40

Introduction and application of the component transfer path analysis

Ruimeng Wu
manager
Müller-BBM VibroAkustik Systeme Beijing Ltd
CHINA
The presentation will introduce Müller-BBM VibroAkustik Systeme Beijing before discussing the component transfer path analysis application scenario, component transfer path analysis theory and the customer case.

What the audience will learn

  • Understanding the theory of CTPA
  • How to apply professional software tools to perform CTPA analyses of vehicles
  • Müller-BBM VibroAkustik Systeme Beijing's advantage in CTPA analyses

13:20

TBC

14:00

Test the future of automotive EV and AV

Rui Li
marketing initiative manager
Keysight
CHINA
The automotive industry is developing faster than we expect, especially in China. The EV market is ramping up quickly as AV technology evolves. Testing ability and efficiency is quite important before going to market. This presentation will introduce the latest test solutions and how these test solutions can help advance the automotive industry.

What the audience will learn

  • Automotive industry trend introduction
  • High-power, high-voltage charging and EV testing
  • SDV-based autonomous driving challenges and test solutions

14:30

Product off-line acoustics test system

David Dai
SGS acoustics lab manager
SGS-CSTC Standards Technical Services Co. Ltd
CHINA
The presentation will cover using the sound and vibration characteristics to conduct quality inspection on products on the production line, replacing manual inspection with objective data collection and analysis; utilizing automation to enhance inspection efficiency, combining multiple dimensions such as current, voltage and speed to analyze and judge faults, while also completing statistical process control (SPC) analysis; and combining machine learning to replace subjective personal judgments, aiming to save labor costs, make inspections more efficient and accurate, and effectively promote the improvement of product quality.

What the audience will learn

  • The application of sound and vibration characteristics for quality inspection on the production line
  • The use of objective data collection and analysis to replace manual inspection
  • The importance of analyzing faults using multiple parameters such as current, voltage and speed
  • The benefits of automation in enhancing inspection efficiency

15:00

Precise simulation for the commercialization of advanced automated driving

Dr. Peng Cao
CEO
PilotD Automotive (Ningbo) Co. Ltd
CHINA
PilotD Automotive, as a leader in precise simulation for automated driving, has been dedicated to developing software and hardware solutions for simulation-based test and validation. In this presentation, Dr Cao Peng will discuss the positive impact of precise simulation on the commercialization of automated driving, and share PilotD Automotive's innovative research results in this field.

What the audience will learn

  • Simulation
  • Automated driving
  • Sensor model

15:30

Automated testing of intelligent cockpit-HMI communication networks and interactive functions

Qiang Sun
vice president
Shenyang Dotrust Technologies Co. Ltd
CHINA
The presentation will cover communication network testing for intelligent cockpit controllers such as TC8 Layers 1-7, ethernet bootloader, ETH-CAN Gateway routing, SOA and so on, including interactive functional testing such as multiscreen control, voice interaction, audio interaction, navigation/video interaction, etc. It also introduces how to visualize and automate test systems.

What the audience will learn

  • Automated testing of intelligent cockpit HMI communication networks
  • Automated testing of intelligent cockpit HMI interactive functions
  • Intelligent cockpit and intelligent driving and cloud convergence testing

16:00

Electric motor and inverter measurements in high-EMC environment

Mitch Marks
head of business development
HBK
CHINA
Inverter voltages and frequencies continue to increase with new SiC and GaN switching devices. These high-frequency devices can cause a large amount of EMI/EMC generation inside of a test cell. HBK will showcase the new issues with measuring modern inverters, and how its fiber-optic power measurement system is helping to reduce these issues.

What the audience will learn

  • What causes EMC
  • Measurement techniques to reduce EMC
  • Comparison of technologies
  • Measurement
  • Motors and inverters

16:30

TBC

Day 2 - Thursday, August 29

10:00

RF validation test – challenges and solutions

Kai Servatius
business development manager, international sales
Noffz Technologies GmbH
GERMANY
The utilization of new wireless communication technologies for a wide range of applications is becoming more comprehensive each year. 5G, V2X, UWB, wi-fi 6E, BLE, GNSS and more technologies are being integrated into modern vehicles and consumer goods. Customers expect excellent performance and ease of use when interacting with these sophisticated devices. For this reason, the test complexity in RF validation and production has increased significantly. The presentation will summarize the challenges and lay out the means to successfully test interactive products for validation and production.

What the audience will learn

  • New wireless tech integration like 5G, V2X, UWB, wi-fi 6E, BLE and GNSS in vehicles and consumer goods
  • The growing demands for performance and user-friendliness in using advanced devices
  • The increased test complexity in RF validation and production, emphasizing effective testing strategies

10:30

Reduce energy usage by 35% using hybrid HPU technology

James Hennen
senior business development manager
MTS Systems
USA
The need to maximize energy efficiency and comply with regional and global decarbonization mandates poses daunting challenges for test laboratory managers. In response, MTS has engineered a new, hybrid approach to hydraulic power generation that employs state-of-the-art digital displacement (radial flow) technology to modulate flow during typical demand, while engaging conventional swash plate (axial flow) technology to achieve maximum efficiency during peak use. This presentation examines the benefits of this new hybrid power generation technology, presents data that demonstrates its effectiveness and explores the numerous ways it will be integrated throughout existing test laboratory infrastructure to dramatically reduce energy usage.

What the audience will learn

  • A technical understanding of an innovative hybrid approach to hydraulic power generation
  • The benefits of hybrid HPU technology and the data supporting energy efficiency claims
  • How hybrid HPU technology can be integrated into existing test laboratory infrastructure

11:00

From datalogger to the analyzing system

Juergen Voigt
Sales Manager, Asia
Windhill Technologies Co. Ltd
CHINA
New technologies such as start-stop, EV, hybrid drives or intelligent driver assistance bring various data buses into the vehicle. With these, troubleshooting during development becomes and remains more complex. There is less and less time to extensively test new models. Therefore, every test drive should provide as much information as possible.

What the audience will learn

  • New requirements for collecting vehicle data
  • Controlling the amount of data – parallel and in real time!
  • Convenient network connection and preparation of the data
  • Measurements of alternative drives and electric compressors

11:30

Vehicle energy management test solution based on high-precision bench

Zhe Gao
product manager
FEV China Software and Testing Solutions Co. Ltd
CHINA
Vehicle energy management analysis can clearly indicate the distribution of the energy consumption of a vehicle and give suggestions for optimizing and improving the vehicle's energy efficiency under the premise of meeting the vehicle power demand and driving comfort requirement. Vehicle energy management or vehicle energy flow testing is indispensable in the verification stage of vehicle prototyping, model upgrading and benchmark vehicle analysis. This presentation provides a test solution of a high-precision shaft-coupled four-dynamometer test bench with a high- and low-temperature climate chamber.

What the audience will learn

  • What is vehicle energy management?
  • What are the advantages of a high-precision vehicle energy management test bench?
  • Which tests in regard to vehicle energy management can be performed on the test bench?

12:00

Robo Galaxy: intelligent driving data factory on cloud

Xiaopeng Lu
senior expert, intelligent driving software development
Lotus Robotics
CHINA
Robo Galaxy is a hybrid cloud that integrates the elastic computing power of public clouds, the massive storage of private clouds and the compliant processes of the secure data center. Robo Galaxy offers a full process service that includes data collection, data compliance, data annotation, data training and data simulation. It offers data management services and data display services.

What the audience will learn

  • Accelerating the R&D closed loop of intelligent driving
  • Ensuring the safety of intelligent driving functions with extensive scenario verification
  • High-integration, low-cost in-vehicle data collection equipment

12:40

TSMaster automotive Ethernet SOME/IP and DoIP solution

Longfeng Gong
technical support operations manager
Shanghai Tosun Technology Ltd
CHINA
This speech will introduce Tosun's latest automotive Ethernet emulation solution. For the application requirements of automotive Ethernet application layer protocols, TSMaster is based on Tosun's self-developed Ethernet virtual substrate architecture to achieve the SOME/IP service instance application, and supports ethernet emulation test solutions for private protocols. At the same time, TSMaster provides automotive Ethernet diagnostic DoIP flashing solutions, zero-code, fast configuration of ethernet diagnostic processes, one-button automated ECU flashing software platform.

What the audience will learn

  • Tosun's self-developed ethernet virtual substrate architecture to achieve the different ethernet service instance applications
  • How to easily implement SOME/IP service testing in TSMaster
  • TSMaster supports ethernet emulation custom solution for private protocols
  • TSMaster DoIP supports zero-code diagnostic configuration flow
  • One-button ECU automated diagnostic flashing solution, supporting external program call and reuse development

13:20

Using kurtosis control to accelerate automotive structural testing

Leo Zhang
China country manager
Vibration Research Corporation
CHINA
Structural testing using controlled random excitation is a long-accepted method of finding design and assembly flaws. Kurtosis control allows engineers to conduct such tests in a fraction of the time required for a Gaussian drive signal to precipitate failures. However, engineers must correctly implement the kurtosis control, which prompts a discussion about methods for selecting a transition frequency and implementing effective control. This presentation defines kurtosis and discusses the value of adding kurtosis control to a test profile. It introduces the Kurtosion software: a method of kurtosis control that adjusts kurtosis levels while maintaining test profile and spectrum attributes.

What the audience will learn

  • That the kurtosis of random vibration defines
  • Random, high-peak accelerations are present in real-world data, so adding kurtosis creates a more realistic test than a Gaussian test
  • Increasing kurtosis concentrates test energy to the peak accelerations, causing more damage across all frequencies and ensuring a quicker failure
  • Standards such as IEC 60068-2-64:2019 and GB/T 2423.56-2023 include non-Gaussian or kurtosis control methods

14:00

NVH data and data mining for quality assurance

Yangning Zhang
general manager
Panatech/HBK Discom
CHINA
Acoustic issues are now challenging the electric vehicle industry much more than in the past. NVH quality gates are being installed not only at the end-of-line but also on many other earlier production stages, for example, component level such as gear, bearing, pump, gearbox, electrical motor, etc. The conventional NVH system and tools on post-processing NVH results are increasingly unable to meet these challenges because of data breadth and depth aspects. Therefore, a comprehensive solution for NVH data analysis over the cloud will be presented here, as the customer needs deeper insights on DUT NVH signatures, with a more efficient and higher fidelity tool for the NVH correlation analysis and NVH root cause analysis.

What the audience will learn

  • The concept of a data hub
  • The interface to data mining external tools and artificial intelligence
  • Examples of data mining tools applied to NVH

14:30

Failure detection in autonomous vehicles

Zhifeng Li
general manager
Sonus Technologies
HONG KONG
In conventional vehicle testing on various roads, the driver would be able to detect abnormal vibrations and noises if something breaks in the suspension, chassis or powertrain through his own subjective perception. With the advent of autonomous driving, vehicle testing is increasingly performed driverless with automated test programs on test cycles to detect failures in real time. The presentation will introduce a real-time, structure-borne noise-based vehicle measurement system using an innovative AI machine learning measurement method. It will present case studies about how the system has been adopted for a detailed functional diagnosis.

What the audience will learn

  • Failure detection
  • Autonomous vehicle
  • AI vibration measurement

15:00

Improvement of EV driving range – from aerodynamics to e-powertrain

Dr. David Schröck
global product manager, wind tunnel technologies
Horiba Europe GmbH
GERMANY
The presentation covers the basics of vehicle road load and levers to improve vehicle efficiency with a focus on aerodynamics and e-motor testing. Answers are given to questions as seen from the viewpoint of a development engineer: what contributes to vehicle road load? What are the impacts of different measures on range? Why is aerodynamics important for vehicle efficiency? What are appropriate aerodynamic test solutions to measure total vehicle drag and wheel and tire contribution? Why is e-motor efficiency important to range? What are appropriate e-motor testing solutions?

What the audience will learn

  • Impact of different efficiency measures on vehicle range
  • Why aerodynamics is important for efficiency
  • Aerodynamic testing methods and WLTP method on a flat belt dyno
  • E-motor testing solutions

15:30

TBC

16:00

Advanced modeling, simulation and analysis software (Cellsage) for battery applications

Xuyu Yin
technical director
Qinda
CHINA
This presentation mainly elaborates on the functions and application value of the advanced modeling, simulation and analysis software CellSage. It briefly explains the electrochemical mechanism model implemented by CellSage based on the specific chemical components, usage conditions and environmental factors, and shows the specific application of CellSage software in the field of battery design optimization, aging simulation, battery performance and life prediction through relevant cases.

What the audience will learn

  • The functions of CellSage in battery modeling, simulation and analysis
  • The value of CellSage for the battery industry chain users
  • How to use CellSage to evaluate battery performance and life based on the application cases

16:30

The GRAS NVH acoustic acquisition solution

Zeal Wang
applications engineering manager
GRAS Sound & Vibration (An Axiometrix Solutions brand)
CHINA
In the field of NVH testing, reliable data and efficient testing methods have always been the goals pursued by engineers. With the development of new technologies such as electric, hybrid and autonomous driving, people have never had a stronger demand for better and more reliable testing methods and data. This presentation will introduce GRAS's corresponding solutions to common tests and challenges in acoustic acquisition in NVH.

What the audience will learn

  • NVH testing importance and challenges
  • Acoustic acquisition key technologies
  • Overview of GRAS solutions
  • Solutions for common challenges
  • Future development trends and prospects